# Tcl autoload index file, version 2.0
# This file is generated by the "auto_mkindex" command
# and sourced to set up indexing information for one or
# more commands.  Typically each line is a command that
# sets an element in the auto_index array, where the
# element name is the name of a command and the value is
# a script that loads the command.

set auto_index(ICON_capacitor) [list source [file join $dir capacitor.sue]]
set auto_index(ICON_dc_current) [list source [file join $dir dc_current.sue]]
set auto_index(ICON_dc_voltage) [list source [file join $dir dc_voltage.sue]]
set auto_index(ICON_inductor) [list source [file join $dir inductor.sue]]
set auto_index(SCHEMATIC_inverter) [list source [file join $dir inverter.sue]]
set auto_index(ICON_inverter) [list source [file join $dir inverter.sue]]
set auto_index(ICON_nmos) [list source [file join $dir nmos.sue]]
set auto_index(ICON_nmos4) [list source [file join $dir nmos4.sue]]
set auto_index(ICON_npn) [list source [file join $dir npn.sue]]
set auto_index(ICON_pmos) [list source [file join $dir pmos.sue]]
set auto_index(ICON_pmos4) [list source [file join $dir pmos4.sue]]
set auto_index(ICON_pnp) [list source [file join $dir pnp.sue]]
set auto_index(ICON_pulse) [list source [file join $dir pulse.sue]]
set auto_index(ICON_resistor) [list source [file join $dir resistor.sue]]
set auto_index(ICON_sine_voltage) [list source [file join $dir sine_voltage.sue]]
set auto_index(SCHEMATIC_xgate) [list source [file join $dir xgate.sue]]
set auto_index(ICON_xgate) [list source [file join $dir xgate.sue]]
set auto_index(SCHEMATIC_vcvs) [list source [file join $dir vcvs.sue]]
set auto_index(ICON_vcvs) [list source [file join $dir vcvs.sue]]
